Remove the 'hand-made' MASCODEC UseOption from the platform files and replace it with other options which automatically parsed from features.txt. Also clean up some outdated left-overs and add some missing information (e.g. be more accurate in the config file section). Try to use the most appropriate features - masd and/or masf depending on their characteristics, large_plugin_buffer in the jpegviewer chapter as this is the restricting factor etc.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21426 a1c6a512-1295-4272-9138-f99709370657

manual/advanced_topics/main.tex

@@ -408,8 +408,6 @@ Example of a configuration file:
   menu} The \setting{Manage Settings} menu can be found in the \setting{Main 
   Menu}. The \setting{Manage Settings} menu allows you to save and load 
   \fname{.cfg} files.
-  \opt{MASCODEC}{The \setting{Manage Settings} menu also 
-    allows you to load or save different firmware versions.} 
 
 \begin{description}
   

manual/appendix/config_file_options.tex

@@ -10,8 +10,8 @@
     \toprule
     \textbf{Setting} & \textbf{Allowed Values} & \textbf{Unit}\\
     \midrule\localendhead % endhead breaks with htlatex
-    volume      & \opt{player}{-78 to +18}%
+    volume      & \opt{masd}{-78 to +18}%
-                  \opt{recorder,recorderv2fm,ondiosp,ondiofm}{-100 -to +12}%
+                  \opt{masf}{-100 -to +12}%
                   \opt{h100,h300}{-84 to 0}%
                   \opt{ipodnano}{-72 to +6}%
                   \opt{ipodvideo}{-57 to +6}%
@@ -20,12 +20,14 @@
                   \opt{ipodcolor}{-74 to +6}%
                                         & dB\\
     \nopt{x5}{%
-      bass      & \opt{MASCODEC}{-15 to +15}%
+      bass      & \opt{masd}{-15 to +15}%
+                  \opt{masf}{-12 to +12}%
                   \opt{h100,h300}{0 to +24}%
                   \opt{ipod}{-6 to +9}%
                   \opt{e200}{-24 to +24}%
                                         & dB\\
-      treble    & \opt{MASCODEC}{-15 to +15}%
+      treble    & \opt{masd}{-15 to +15}%
+                  \opt{masf}{-12 to +12}%
                   \opt{h100,h300}{0 to +6}%
                   \opt{ipod}{-6 to +9}%
                   \opt{e200}{-24 to +24}%
@@ -200,7 +202,7 @@
       tagcache\_ram & on, off           & N/A\\
     }%
 
-    \opt{recorder,recorderv2fm}{
+    \opt{masf}{
       loudness      & 0 to 17           & N/A\\
       superbass     & on, off           & N/A\\
       auto volume   & off, 20ms, 2s, 4s, 8s

manual/appendix/file_formats.tex

@@ -10,7 +10,7 @@
   & Directory & \emph{none} & Enter the directory \\
 \includegraphics[width=0.37cm]{appendix/images/icon-audio-file.png} 
   & Audio file & 
-  \opt{MASCODEC}{\fname{.mp2, .mp3}}%
+  \opt{masd,masf}{\fname{.mp2, .mp3}}%
   \opt{swcodec}{\emph{various}\newline%
   (see \ref{ref:Supportedaudioformats}})%
   % do NOT use \reference{} here as that will break the table.
@@ -55,7 +55,7 @@
  \includegraphics[width=0.37cm]{appendix/images/icon-movie-file.png}
  & Video & \fname{.mpg, .mpeg, .mpv, .m2v} & Play the MPEG1/2 video \\
 }
-\opt{MASCODEC}{\opt{lcd_bitmap}{
+\opt{masf}{\opt{lcd_bitmap}{
   \includegraphics[width=0.37cm]{appendix/images/icon-movie-file.png} 
     & Rockbox Video & \fname{.rvf} & View the movie (Rockbox format)\\}
 }

manual/configure_rockbox/playback_options.tex

@@ -69,7 +69,7 @@ you to configure settings related to audio playback.
     This can happen if the \dap{} is knocked, shaken or jogged heavily while
     Rockbox is trying to read the hard drive.
 
-    \opt{MASCODEC}{
+    \opt{masd,masf}{
       The anti-skip buffer can be set to a value between 0 and 7
       seconds.
     }

manual/configure_rockbox/recording_settings.tex

@@ -6,7 +6,7 @@
       where you want to store them in the \setting{File Browser} and select
       \setting{Set As Recording Directory}.}
 
-\opt{MASCODEC}{
+\opt{masf}{
   \section{Quality}
     Choose the quality here (0 to 7). Default is 5, best quality is 7,
     smallest file size is 0. This setting effects how much your sound
@@ -46,7 +46,7 @@
   \section{Frequency}
    \nopt{sansa}{
     Choose the recording frequency (sample rate).
-    \opt{MASCODEC}{48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz}
+    \opt{masf}{48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz}
     \opt{h100,h300}{44.1kHz, 22.05kHz and 11.025kHz}
     \opt{x5}{88.2kHz, 44.1kHz, 22.05kHz and 11.025kHz}
     are available. Higher sample rates use up more disk space, but give better
@@ -54,7 +54,7 @@
     \opt{swcodec}{\note{The 11.025kHz setting is not available when using%
       \setting{MPEG Layer 3} format.}
     }%
-    \opt{MASCODEC}{
+    \opt{masf}{
       The frequency setting also determines which version of the MPEG standard
       the sound is recorded using:\\
       MPEG v1 for 48, 44.1 and 32\\
@@ -87,7 +87,7 @@
     setting to configure how the mono signal is created. Options are L, R and L+R.
 }
 
-\opt{MASCODEC}{
+\opt{masf}{
   \section{Independent Frames}
     The independent frames option tells the \dap{} to encode with the bit
     reservoir disabled, so the frames are independent of each other. This

manual/getting_started/installation.tex

@@ -146,7 +146,7 @@ still available to you.\\
   various important aspects of Rockbox, such as the different versions
   available.\\}}
 
-\opt{MASCODEC}{Rockbox itself comes as a single package. There is no need
+\opt{hwcodec}{Rockbox itself comes as a single package. There is no need
   to install additional software to run Rockbox.}
 \opt{swcodec} {
   \opt{HAVE_RB_BL_ON_DISK}{There are three separate components,
@@ -495,8 +495,10 @@ The new build will be installed over your current build.\\
   data partiton.\\}
 }
 
-The bootloader only changes rarely, and should not normally
+\nopt{hwcodec}{
-need to be updated.\\
+  The bootloader only changes rarely, and should not normally
+  need to be updated.\\
+}
 
 \note{If you use Rockbox Utility be aware that it cannot detect manually
         installed components.}

manual/main_menu/fmradio.tex

@@ -15,7 +15,7 @@
   This menu option switches to the radio screen.
   The FM radio has the ability \opt{recording}{to record and } to
   remember station frequency settings (presets).
-  \opt{MASCODEC}{\note{The radio will shorten battery life, because the
+  \opt{masf}{\note{The radio will shorten battery life, because the
       MAS-chip is set to record mode for instant recordings.}
   }
 

manual/main_menu/main.tex

@@ -128,9 +128,6 @@ The \setting{Manage Settings} option allows the saving and re-loading of user
 configuration settings, browsing the hard drive for alternate firmwares, and finally
 resetting your \dap{} back to initial configuration.
 %
-\opt{MASCODEC}{This menu also allows the user to load different versions of the 
-Rockbox firmware.}
-%
 The details of this menu are covered in
 \reference{ref:manage_settings}.
 

manual/platform/ondiofm.tex

@@ -3,7 +3,6 @@
 \def\UseOption{ondiofm}
 % To not break the current manual
 \edef\UseOption{\UseOption,ondio}
-\edef\UseOption{\UseOption,MASCODEC}
 \edef\UseOption{\UseOption,ONDIO_PAD}
 \edef\UseOption{\UseOption,archos}
 

manual/platform/ondiosp.tex

@@ -2,7 +2,6 @@
 %platform file for the Ondio SP
 \def\UseOption{ondiosp}
 \edef\UseOption{\UseOption,ondio}
-\edef\UseOption{\UseOption,MASCODEC}
 \edef\UseOption{\UseOption,ONDIO_PAD}
 \edef\UseOption{\UseOption,archos}
 \edef\UseOption{\UseOption,rombox}

manual/platform/player.tex

@@ -1,6 +1,5 @@
 % $Id$ %
 \def\UseOption{player}
-\edef\UseOption{\UseOption,MASCODEC}
 \edef\UseOption{\UseOption,PLAYER_PAD}
 \edef\UseOption{\UseOption,HAVE_BACKLIGHT}
 \edef\UseOption{\UseOption,HAVE_DISK_STORAGE}

manual/platform/recorder.tex

@@ -1,6 +1,5 @@
 % $Id$ %
 \def\UseOption{recorder}
-\edef\UseOption{\UseOption,MASCODEC}
 \edef\UseOption{\UseOption,RECORDER_PAD}
 \edef\UseOption{\UseOption,HAVE_BACKLIGHT}
 \edef\UseOption{\UseOption,HAVE_DISK_STORAGE}

manual/platform/recorderv2fm.tex

@@ -1,6 +1,5 @@
 % $Id$ %
 \def\UseOption{recorderv2fm}
-\edef\UseOption{\UseOption,MASCODEC}
 \edef\UseOption{\UseOption,RECORDER_PAD}
 \edef\UseOption{\UseOption,HAVE_BACKLIGHT}
 \edef\UseOption{\UseOption,HAVE_DISK_STORAGE}

manual/plugins/jpegviewer.tex

@@ -8,9 +8,9 @@ greyscale library}.
   the decoding process needs to share memory with audio tracks. To be able to
   view a bigger file you may need to stop playback.}
 }
-\opt{MASCODEC}{
+\nopt{large_plugin_buffer}{%
-\note{This plugin will cause playback to stop.}
+\note{This plugin will cause playback to stop.}%
-}
+}%
 
 \begin{table}
 \begin{btnmap}{}{}
@@ -81,7 +81,7 @@ The menu has the following entries.
 \item[Toggle Slideshow Mode.] Enables or disables the slideshow mode.
 \item[Change Slideshow Timeout.] You can set the timeout for the slideshow
   between 1 second and 20 seconds.
-\nopt{MASCODEC}{
+\opt{large_plugin_buffer}{
 \item[Show Playback Menu.] From the playback menu you can control the
 playback of the currently loaded playlist and change the volume of your \dap.
 }

manual/rockbox_interface/tagcache.tex

@@ -58,8 +58,6 @@ its subdirectories will be scanned and added to the database.
       Directory Cache}) is enabled. \setting{Update now} includes that check
       whether dircache has been enabled or not.}
   }%
-  \opt{MASCODEC}{\setting{Auto Update} does not detect deleted files. To remove
-    deleted files from the database you need to run \setting{Update Now}.}%
 
 \item[Initialize Now]
   You can force Rockbox to rescan your disk for tagged files by