forked from len0rd/rockbox
Split wm8731 and wm8721 drivers. wm8721 can be much simpler since it has no recording. Provide reg bit definitions for those. Add some temporary hacks pcm-pp to prevent crashing when playing after recording. Make playback start after recording on pp5020. Get wm8731 to monitor recording but plans are to do that digitally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14948 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Michael Sevakis
parent
4d34457cd0
commit
15b7321fe1
9 changed files with 522 additions and 209 deletions
|
|
@ -7,7 +7,7 @@
|
|||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Driver for WM8731L audio codec
|
||||
* Driver for WM8721 audio codec
|
||||
*
|
||||
* Based on code from the ipodlinux project - http://ipodlinux.org/
|
||||
* Adapted for Rockbox in January 2006
|
||||
|
|
@ -46,11 +46,6 @@ const struct sound_settings_info audiohw_settings[] = {
|
|||
[SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0},
|
||||
[SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0},
|
||||
[SOUND_STEREO_WIDTH] = {"%", 0, 1, 0, 255, 100},
|
||||
#ifdef HAVE_RECORDING
|
||||
[SOUND_LEFT_GAIN] = {"dB", 1, 1,-128, 96, 0},
|
||||
[SOUND_RIGHT_GAIN] = {"dB", 1, 1,-128, 96, 0},
|
||||
[SOUND_MIC_GAIN] = {"dB", 1, 1,-128, 108, 16},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* convert tenth of dB volume (-730..60) to master volume register value */
|
||||
|
|
@ -118,13 +113,8 @@ void audiohw_enable_output(bool enable)
|
|||
|
||||
codec_set_active(0x0);
|
||||
|
||||
#ifdef HAVE_WM8721
|
||||
/* DACSEL=1 */
|
||||
wmcodec_write(0x4, 0x10);
|
||||
#elif defined HAVE_WM8731
|
||||
/* DACSEL=1, BYPASS=1 */
|
||||
wmcodec_write(0x4, 0x18);
|
||||
#endif
|
||||
|
||||
/* set power register to POWEROFF=0 on OUTPD=0, DACPD=0 */
|
||||
wmcodec_write(PWRMGMT, 0x67);
|
||||
|
|
@ -133,7 +123,7 @@ void audiohw_enable_output(bool enable)
|
|||
/* IWL=00(16 bit) FORMAT=10(I2S format) */
|
||||
wmcodec_write(AINTFCE, 0x42);
|
||||
|
||||
audiohw_set_sample_rate(WM8731L_44100HZ);
|
||||
audiohw_set_sample_rate(WM8721_USB24_44100HZ);
|
||||
|
||||
/* set the volume to -6dB */
|
||||
wmcodec_write(LOUTVOL, IPOD_PCM_LEVEL);
|
||||
|
|
@ -145,16 +135,8 @@ void audiohw_enable_output(bool enable)
|
|||
/* 5. Set DACMU = 0 to soft-un-mute the audio DACs. */
|
||||
wmcodec_write(DACCTRL, 0x0);
|
||||
|
||||
#if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
|
||||
/* We need to enable bit 4 of GPIOL for output for sound on H10 */
|
||||
GPIOL_OUTPUT_VAL |= 0x10;
|
||||
#endif
|
||||
audiohw_mute(0);
|
||||
} else {
|
||||
#if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
|
||||
/* We need to disable bit 4 of GPIOL to disable sound on H10 */
|
||||
GPIOL_OUTPUT_VAL &= ~0x10;
|
||||
#endif
|
||||
audiohw_mute(1);
|
||||
}
|
||||
}
|
||||
|
|
@ -166,32 +148,13 @@ int audiohw_set_master_vol(int vol_l, int vol_r)
|
|||
/* 1111001 == 0dB */
|
||||
/* 0110000 == -73dB */
|
||||
/* 0101111 == mute (0x2f) */
|
||||
|
||||
wmcodec_write(LOUTVOL, VOLUME_ZC_WAIT | vol_l);
|
||||
wmcodec_write(ROUTVOL, VOLUME_ZC_WAIT | vol_r);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int audiohw_set_mixer_vol(int channel1, int channel2)
|
||||
{
|
||||
(void)channel1;
|
||||
(void)channel2;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void audiohw_set_bass(int value)
|
||||
{
|
||||
(void)value;
|
||||
}
|
||||
|
||||
void audiohw_set_treble(int value)
|
||||
{
|
||||
(void)value;
|
||||
}
|
||||
|
||||
/* Nice shutdown of WM8731 codec */
|
||||
/* Nice shutdown of WM8721 codec */
|
||||
void audiohw_close(void)
|
||||
{
|
||||
/* set DACMU=1 DEEMPH=0 */
|
||||
|
|
@ -225,86 +188,3 @@ void audiohw_set_sample_rate(int sampling_control)
|
|||
wmcodec_write(SAMPCTRL, sampling_control);
|
||||
codec_set_active(0x1);
|
||||
}
|
||||
|
||||
void audiohw_enable_recording(bool source_mic)
|
||||
{
|
||||
static int line_level = 0x17;
|
||||
static int mic_boost = true;
|
||||
codec_set_active(0x0);
|
||||
|
||||
/* set BCLKINV=0(Dont invert BCLK) MS=1(Enable Master) LRSWAP=0
|
||||
* LRP=0 IWL=00(16 bit) FORMAT=10(I2S format) */
|
||||
wmcodec_write(AINTFCE, 0x42);
|
||||
|
||||
wmcodec_write(LOUTVOL, 0x0); /* headphone mute left */
|
||||
wmcodec_write(ROUTVOL, 0x0); /* headphone mute right */
|
||||
|
||||
|
||||
if(source_mic){
|
||||
wmcodec_write(LINVOL, 0x80); /* line in mute left */
|
||||
wmcodec_write(RINVOL, 0x80); /* line in mute right */
|
||||
|
||||
|
||||
if (mic_boost) {
|
||||
wmcodec_write(AAPCTRL, 0x5); /* INSEL=mic, MIC_BOOST=enable */
|
||||
} else {
|
||||
wmcodec_write(AAPCTRL, 0x4); /* INSEL=mic */
|
||||
}
|
||||
} else {
|
||||
if (line_level == 0) {
|
||||
wmcodec_write(LINVOL, 0x80);
|
||||
wmcodec_write(RINVOL, 0x80);
|
||||
} else {
|
||||
wmcodec_write(LINVOL, line_level);
|
||||
wmcodec_write(RINVOL, line_level);
|
||||
}
|
||||
wmcodec_write(AAPCTRL, 0xa); /* BY PASS, mute mic, INSEL=line in */
|
||||
}
|
||||
|
||||
/* disable ADC high pass filter, mute dac */
|
||||
wmcodec_write(DACCTRL, 0x9);
|
||||
|
||||
/* power on (PWR_OFF=0) */
|
||||
if(source_mic){
|
||||
/* CLKOUTPD OSCPD OUTPD DACPD LINEINPD */
|
||||
wmcodec_write(PWRMGMT, 0x79);
|
||||
} else {
|
||||
wmcodec_write(PWRMGMT, 0x7a); /* MICPD */
|
||||
}
|
||||
|
||||
codec_set_active(0x1);
|
||||
}
|
||||
|
||||
void audiohw_disable_recording(void)
|
||||
{
|
||||
/* set DACMU=1 DEEMPH=0 */
|
||||
wmcodec_write(DACCTRL, 0x8);
|
||||
|
||||
/* ACTIVE=0 */
|
||||
codec_set_active(0x0);
|
||||
|
||||
/* line in mute left & right*/
|
||||
wmcodec_write(LINVOL, 0x80);
|
||||
wmcodec_write(RINVOL, 0x80);
|
||||
|
||||
/* set DACSEL=0, MUTEMIC=1 */
|
||||
wmcodec_write(AAPCTRL, 0x2);
|
||||
|
||||
/* set POWEROFF=0 OUTPD=0 DACPD=1 */
|
||||
wmcodec_write(PWRMGMT, 0x6f);
|
||||
|
||||
/* set POWEROFF=1 OUTPD=1 DACPD=1 */
|
||||
wmcodec_write(PWRMGMT, 0xff);
|
||||
}
|
||||
|
||||
void audiohw_set_recvol(int left, int right, int type)
|
||||
{
|
||||
(void)left;
|
||||
(void)right;
|
||||
(void)type;
|
||||
}
|
||||
|
||||
void audiohw_set_monitor(int enable)
|
||||
{
|
||||
(void)enable;
|
||||
}
|
||||
324
firmware/drivers/audio/wm8731.c
Normal file
324
firmware/drivers/audio/wm8731.c
Normal file
|
|
@ -0,0 +1,324 @@
|
|||
/***************************************************************************
|
||||
* __________ __ ___.
|
||||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||||
* \/ \/ \/ \/ \/
|
||||
* $Id$
|
||||
*
|
||||
* Driver for WM8731L audio codec
|
||||
*
|
||||
* Based on code from the ipodlinux project - http://ipodlinux.org/
|
||||
* Adapted for Rockbox in January 2006
|
||||
*
|
||||
* Original file: linux/arch/armnommu/mach-ipod/audio.c
|
||||
*
|
||||
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
|
||||
*
|
||||
* All files in this archive are subject to the GNU General Public License.
|
||||
* See the file COPYING in the source tree root for full license agreement.
|
||||
*
|
||||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||||
* KIND, either express or implied.
|
||||
*
|
||||
****************************************************************************/
|
||||
#include "config.h"
|
||||
#include "logf.h"
|
||||
#include "system.h"
|
||||
#include "string.h"
|
||||
#include "audio.h"
|
||||
|
||||
#include "wmcodec.h"
|
||||
#include "audiohw.h"
|
||||
#include "i2s.h"
|
||||
|
||||
const struct sound_settings_info audiohw_settings[] = {
|
||||
[SOUND_VOLUME] = {"dB", 0, 1, -74, 6, -25},
|
||||
/* HAVE_SW_TONE_CONTROLS */
|
||||
[SOUND_BASS] = {"dB", 0, 1, -24, 24, 0},
|
||||
[SOUND_TREBLE] = {"dB", 0, 1, -24, 24, 0},
|
||||
[SOUND_BALANCE] = {"%", 0, 1,-100, 100, 0},
|
||||
[SOUND_CHANNELS] = {"", 0, 1, 0, 5, 0},
|
||||
[SOUND_STEREO_WIDTH] = {"%", 0, 1, 0, 255, 100},
|
||||
#ifdef HAVE_RECORDING
|
||||
[SOUND_LEFT_GAIN] = {"dB", 1, 1, 0, 31, 23},
|
||||
[SOUND_RIGHT_GAIN] = {"dB", 1, 1, 0, 31, 23},
|
||||
[SOUND_MIC_GAIN] = {"dB", 1, 1, 0, 1, 0},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* Init values/shadows
|
||||
* Ignore bit 8 since that only specifies "both" for updating
|
||||
* gains */
|
||||
static unsigned char wm8731_regs[7] =
|
||||
{
|
||||
[LINVOL] = LINVOL_LINMUTE,
|
||||
[RINVOL] = RINVOL_RINMUTE,
|
||||
[LOUTVOL] = ROUTVOL_RZCEN,
|
||||
[ROUTVOL] = ROUTVOL_RZCEN,
|
||||
[AAPCTRL] = AAPCTRL_MUTEMIC | AAPCTRL_DACSEL,
|
||||
[DAPCTRL] = DAPCTRL_DACMU | DAPCTRL_DEEMP_44KHz | DAPCTRL_ADCHPD,
|
||||
[PDCTRL] = PDCTRL_LINEINPD | PDCTRL_MICPD | PDCTRL_ADCPD |
|
||||
PDCTRL_OUTPD | PDCTRL_OSCPD | PDCTRL_CLKOUTPD,
|
||||
};
|
||||
|
||||
static void wm8731_write(int reg, unsigned val)
|
||||
{
|
||||
wm8731_regs[reg] = (unsigned char)val;
|
||||
wmcodec_write(reg, val);
|
||||
}
|
||||
|
||||
static void wm8731_write_and(int reg, unsigned bits)
|
||||
{
|
||||
wm8731_write(reg, wm8731_regs[reg] & bits);
|
||||
}
|
||||
|
||||
static void wm8731_write_or(int reg, unsigned bits)
|
||||
{
|
||||
wm8731_write(reg, wm8731_regs[reg] | bits);
|
||||
}
|
||||
|
||||
/* convert tenth of dB volume (-730..60) to master volume register value */
|
||||
int tenthdb2master(int db)
|
||||
{
|
||||
/* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
|
||||
/* 1111111 == +6dB (0x7f) */
|
||||
/* 1111001 == 0dB (0x79) */
|
||||
/* 0110000 == -73dB (0x30 */
|
||||
/* 0101111 == mute (0x2f) */
|
||||
|
||||
if (db < VOLUME_MIN) {
|
||||
return 0x2f;
|
||||
} else {
|
||||
return((db/10)+0x30+73);
|
||||
}
|
||||
}
|
||||
|
||||
/* convert tenth of dB volume (-780..0) to mixer volume register value */
|
||||
int tenthdb2mixer(int db)
|
||||
{
|
||||
if (db < -660) /* 1.5 dB steps */
|
||||
return (2640 - db) / 15;
|
||||
else if (db < -600) /* 0.75 dB steps */
|
||||
return (990 - db) * 2 / 15;
|
||||
else if (db < -460) /* 0.5 dB steps */
|
||||
return (460 - db) / 5;
|
||||
else /* 0.25 dB steps */
|
||||
return -db * 2 / 5;
|
||||
}
|
||||
|
||||
int sound_val2phys(int setting, int value)
|
||||
{
|
||||
int result;
|
||||
|
||||
switch(setting)
|
||||
{
|
||||
case SOUND_LEFT_GAIN:
|
||||
case SOUND_RIGHT_GAIN:
|
||||
result = (value - 23) * 15;
|
||||
break;
|
||||
case SOUND_MIC_GAIN:
|
||||
result = value * 200;
|
||||
break;
|
||||
default:
|
||||
result = value;
|
||||
break;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
void audiohw_mute(bool mute)
|
||||
{
|
||||
if (mute) {
|
||||
/* Set DACMU = 1 to soft-mute the audio DACs. */
|
||||
wm8731_write_or(DAPCTRL, DAPCTRL_DACMU);
|
||||
} else {
|
||||
/* Set DACMU = 0 to soft-un-mute the audio DACs. */
|
||||
wm8731_write_and(DAPCTRL, ~DAPCTRL_DACMU);
|
||||
}
|
||||
}
|
||||
|
||||
static void codec_set_active(int active)
|
||||
{
|
||||
/* set active to 0x0 or 0x1 */
|
||||
wmcodec_write(ACTIVECTRL, active ? ACTIVECTRL_ACTIVE : 0);
|
||||
}
|
||||
|
||||
void audiohw_preinit(void)
|
||||
{
|
||||
i2s_reset();
|
||||
|
||||
/* POWER UP SEQUENCE */
|
||||
/* 1) Switch on power supplies. By default the WM8731 is in Standby Mode,
|
||||
* the DAC is digitally muted and the Audio Interface and Outputs are
|
||||
* all OFF. */
|
||||
wmcodec_write(RESET, RESET_RESET);
|
||||
|
||||
/* 2) Set all required bits in the Power Down register (0Ch) to '0';
|
||||
* EXCEPT the OUTPD bit, this should be set to '1' (Default). */
|
||||
wm8731_write(PDCTRL, wm8731_regs[PDCTRL]);
|
||||
|
||||
/* 3) Set required values in all other registers except 12h (Active). */
|
||||
wmcodec_write(AINTFCE, AINTFCE_FORMAT_I2S | AINTFCE_IWL_16BIT |
|
||||
AINTFCE_MS);
|
||||
wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]);
|
||||
wm8731_write(DAPCTRL, wm8731_regs[DAPCTRL]);
|
||||
wmcodec_write(SAMPCTRL, WM8731_USB24_44100HZ);
|
||||
|
||||
/* 5) The last write of the sequence should be setting OUTPD to '0'
|
||||
* (active) in register 0Ch, enabling the DAC signal path, free
|
||||
* of any significant power-up noise. */
|
||||
wm8731_write_and(PDCTRL, ~PDCTRL_OUTPD);
|
||||
}
|
||||
|
||||
void audiohw_postinit(void)
|
||||
{
|
||||
sleep(HZ);
|
||||
|
||||
/* 4) Set the ‘Active’ bit in register 12h. */
|
||||
codec_set_active(true);
|
||||
|
||||
audiohw_mute(false);
|
||||
|
||||
#if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
|
||||
/* We need to enable bit 4 of GPIOL for output for sound on H10 */
|
||||
GPIOL_OUTPUT_VAL |= 0x10;
|
||||
#endif
|
||||
}
|
||||
|
||||
int audiohw_set_master_vol(int vol_l, int vol_r)
|
||||
{
|
||||
/* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
|
||||
/* 1111111 == +6dB */
|
||||
/* 1111001 == 0dB */
|
||||
/* 0110000 == -73dB */
|
||||
/* 0101111 == mute (0x2f) */
|
||||
wm8731_write(LOUTVOL, LOUTVOL_LZCEN | (vol_l & LOUTVOL_LHPVOL_MASK));
|
||||
wm8731_write(ROUTVOL, ROUTVOL_RZCEN | (vol_r & ROUTVOL_RHPVOL_MASK));
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Nice shutdown of WM8731 codec */
|
||||
void audiohw_close(void)
|
||||
{
|
||||
/* POWER DOWN SEQUENCE */
|
||||
/* 1) Set the OUTPD bit to '1' (power down). */
|
||||
wm8731_write_or(PDCTRL, PDCTRL_OUTPD);
|
||||
/* 2) Remove the WM8731 supplies. */
|
||||
}
|
||||
|
||||
void audiohw_set_nsorder(int order)
|
||||
{
|
||||
static const unsigned char deemp[4] =
|
||||
{
|
||||
DAPCTRL_DEEMP_DISABLE,
|
||||
DAPCTRL_DEEMP_32KHz,
|
||||
DAPCTRL_DEEMP_44KHz,
|
||||
DAPCTRL_DEEMP_48KHz
|
||||
};
|
||||
|
||||
if ((unsigned)order >= ARRAYLEN(deemp))
|
||||
order = 0;
|
||||
|
||||
wm8731_write(DAPCTRL,
|
||||
(wm8731_regs[DAPCTRL] & ~DAPCTRL_DEEMP_MASK) | deemp[order]);
|
||||
}
|
||||
|
||||
void audiohw_set_sample_rate(int sampling_control)
|
||||
{
|
||||
codec_set_active(false);
|
||||
wmcodec_write(SAMPCTRL, sampling_control);
|
||||
codec_set_active(true);
|
||||
}
|
||||
|
||||
void audiohw_enable_recording(bool source_mic)
|
||||
{
|
||||
codec_set_active(false);
|
||||
|
||||
wm8731_regs[PDCTRL] &= ~PDCTRL_ADCPD;
|
||||
wm8731_regs[PDCTRL] |= PDCTRL_DACPD;
|
||||
wm8731_regs[AAPCTRL] &= ~AAPCTRL_DACSEL;
|
||||
|
||||
if (source_mic) {
|
||||
wm8731_write_or(LINVOL, LINVOL_LINMUTE);
|
||||
wm8731_write_or(RINVOL, RINVOL_RINMUTE);
|
||||
wm8731_regs[PDCTRL] &= ~PDCTRL_MICPD;
|
||||
wm8731_regs[PDCTRL] |= PDCTRL_LINEINPD;
|
||||
wm8731_regs[AAPCTRL] |= AAPCTRL_INSEL | AAPCTRL_SIDETONE;
|
||||
wm8731_regs[AAPCTRL] &= ~AAPCTRL_MUTEMIC;
|
||||
} else {
|
||||
wm8731_regs[PDCTRL] |= PDCTRL_MICPD;
|
||||
wm8731_regs[PDCTRL] &= ~PDCTRL_LINEINPD;
|
||||
wm8731_regs[AAPCTRL] |= AAPCTRL_MUTEMIC | AAPCTRL_BYPASS;
|
||||
wm8731_regs[AAPCTRL] &= ~(AAPCTRL_INSEL | AAPCTRL_SIDETONE);
|
||||
}
|
||||
|
||||
wm8731_write(PDCTRL, wm8731_regs[PDCTRL]);
|
||||
wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]);
|
||||
|
||||
if (!source_mic) {
|
||||
wm8731_regs[AAPCTRL] |= AAPCTRL_INSEL | AAPCTRL_SIDETONE;
|
||||
wm8731_regs[AAPCTRL] &= ~(AAPCTRL_MUTEMIC | AAPCTRL_BYPASS);
|
||||
} else {
|
||||
wm8731_write_and(LINVOL, ~LINVOL_LINMUTE);
|
||||
wm8731_write_and(RINVOL, ~RINVOL_RINMUTE);
|
||||
}
|
||||
|
||||
codec_set_active(true);
|
||||
}
|
||||
|
||||
void audiohw_disable_recording(void)
|
||||
{
|
||||
codec_set_active(false);
|
||||
|
||||
/* Mute inputs */
|
||||
wm8731_write_or(LINVOL, LINVOL_LINMUTE);
|
||||
wm8731_write_or(RINVOL, RINVOL_RINMUTE);
|
||||
wm8731_write_or(AAPCTRL, AAPCTRL_MUTEMIC);
|
||||
|
||||
/* Turn off input analog audio paths */
|
||||
wm8731_regs[AAPCTRL] &= ~(AAPCTRL_BYPASS | AAPCTRL_SIDETONE);
|
||||
wm8731_write(AAPCTRL, wm8731_regs[AAPCTRL]);
|
||||
|
||||
/* Set power config */
|
||||
wm8731_regs[PDCTRL] &= ~PDCTRL_DACPD;
|
||||
wm8731_regs[PDCTRL] |= PDCTRL_MICPD | PDCTRL_LINEINPD |
|
||||
PDCTRL_ADCPD;
|
||||
wm8731_write(PDCTRL, wm8731_regs[PDCTRL]);
|
||||
|
||||
/* Select DAC */
|
||||
wm8731_write_or(AAPCTRL, AAPCTRL_DACSEL);
|
||||
|
||||
codec_set_active(true);
|
||||
}
|
||||
|
||||
void audiohw_set_recvol(int left, int right, int type)
|
||||
{
|
||||
switch (type)
|
||||
{
|
||||
case AUDIO_GAIN_MIC:
|
||||
if (left > 0) {
|
||||
wm8731_write_or(AAPCTRL, AAPCTRL_MIC_BOOST);
|
||||
}
|
||||
else {
|
||||
wm8731_write_and(AAPCTRL, ~AAPCTRL_MIC_BOOST);
|
||||
}
|
||||
break;
|
||||
case AUDIO_GAIN_LINEIN:
|
||||
wm8731_regs[LINVOL] &= ~LINVOL_MASK;
|
||||
wm8731_write(LINVOL, wm8731_regs[LINVOL] | (left & LINVOL_MASK));
|
||||
wm8731_regs[RINVOL] &= ~RINVOL_MASK;
|
||||
wm8731_write(RINVOL, wm8731_regs[RINVOL] | (right & RINVOL_MASK));
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
void audiohw_set_monitor(int enable)
|
||||
{
|
||||
/* TODO: Implement for FM monitoring */
|
||||
(void)enable;
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue