devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

Physical description of the Sandisk Sansa E200 player. Also holes for the Iaudio and H1xx. No badgers though.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13426 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Christi Scarborough 2007-05-19 20:36:21 +00:00
parent a05e5cc133
commit 152fafe185
1 changed files with 29 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

32
manual/rockbox_interface/main.tex
View file

@ -37,7 +37,12 @@ paragraph.
used to navigate menus by pressing it up, down, left and right. Pressing the
joystick down is labelled \ButtonSelect{} throughout this manual. Its
directions are labelled \ButtonRight{}, \ButtonDown{}, \ButtonLeft{} and
\ButtonUp{}.}
\ButtonUp{}.
The internal microphone is located on the left hand side of the nit towards the
top, and there is a small reset hole on the bottom of the unit between the
power and USB sockets. To perform a hard reset, insert a paperclip into this
hole.}
%
\opt{h300}{
Hold or lay the \dap{} so that the side with the button pad and
@ -179,7 +184,12 @@ paragraph.
Below the switch is a lozenge shaped button which is the \ButtonRecord{}
button, and below that the final button on this side of the unit, the
\ButoonPlay{} button. On the bottom of the unit is the connecter for the
\ButoonPlay{} button. Just below this is a small hole which is difficult to
locate by touch which is the internal microphone. At the very bottom of
this side of the unit is the reset hole, which can be used to perform a hard
reset by inserting a paper clip.
On the bottom of the unit is the connector for the
\playerman{} subpack or dock. On the top of the unit is a charge
indicator light, which may feel a bit like a button, but isn't.
@ -187,7 +197,23 @@ paragraph.
remote connector. Below this is a cover which protects the \opt{x5}{USB host
connector.}\opt{m5}{USB and charging connector}.}
%
\nopt{h1xx,h300,ipodnano,ipodvideo,ipodmini,ipod4g,ipod3g,ipodcolor,ondio,h10,h10_5gb,gigabeatf,x5,m5}
\opt{e200}{
Hold the \dap with the turning wheel at the front and bottom. On the bottom left
of the front of the \dap{} is a raised round button, the \ButtonPower{} button.
Above and to the left of this, on the outside of the turning wheel are four
buttons. These are the \ButtonUp{}, \ButtonDown{}, \ButtonLeft{} and
\ButtonRight{} buttons. Inside the wheel is thr \ButtonSelect{} button. Turning
the wheel to the right activates the \ButtonScrollDown{} function, and to the
left, the \ButtonScrollUp{} function.
On the right of the unit is a slot for inserting flash cards. On the bottom is
the connector for the USB cable. On the left is the \ButtonRecord{} button, and
on the top, there is the headphone socket to the right, and the \ButtonHold{}
switch. Moving this switch to the right activates hold mode in which none of the
other buttons have any effect. Just to the left of the \ButtonHold{} switch is a
small hole which contains the internal microphone.}
%
\nopt{h1xx,h300,ipodnano,ipodvideo,ipodmini,ipod4g,ipod3g,ipodcolor,ondio,h10,h10_5gb,gigabeatf,x5,m5,e200}
{
\fixme{Write a section describing the \dap{} for blind users.}
}