devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

split Q13 into two separate questions

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@2000 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Daniel Stenberg 2002-08-27 11:59:01 +00:00
parent 800d27d923
commit 1436b107a0
1 changed files with 6 additions and 8 deletions
Download patch file Download diff file Expand all files Collapse all files

12
docs/BATTERY-FAQ
View file

@ -133,10 +133,8 @@ A12: In our testing we found the following results:
So leaving the unit on and paused consumes ~100mA, and thus much less
than needing to reboot the unit. Your mileage may vary.
Q13: When I plug the charger in my Recorder, it doesn't immediately start
charging the batteries. And when I plug in the charger when the Recorder
is turned off, it turns itself on and starts charging in the Archos
software? What's up?
Q13: When I plug in the charger when the Recorder is turned off, it turns
itself on and starts charging in the Archos software? What's up?
A13: There is a switch in the DC IN jack of the Jukebox - when a charger (or
whatever) is plugged in, the unit is powered on, even if the charger
is not plugged in a mains outlet.
@ -146,11 +144,11 @@ A13: There is a switch in the DC IN jack of the Jukebox - when a charger (or
Rockbox) from the disk, but goes into charging mode instead. You can
use this feature to get to the Archos charger if you want to.
When Rockbox is running on the Recorder (the device has been booted
Q14: When I plug the charger in my Recorder, it doesn't immediately start
charging the batteries!
A14: When Rockbox is running on the Recorder (the device has been booted
without the charger) it's power management code runs once per minute
(thus the charge level and charging status is only updated every minute).
If the battery is not full, it will start charging. If the 'deep
discharge' mode is enabled in the settings menu, it will start charging
only when the battery is almost empty.