imx233/fuze+: rework crt0 and linker script to be able to load at any address and self-copy at the right one

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30587 a1c6a512-1295-4272-9138-f99709370657

bootloader/imx233.c

@@ -101,8 +101,8 @@ static void usb_mode(int connect_timeout)
 }
 #endif /* HAVE_BOOTLOADER_USB_MODE */
 
-void main(uint32_t arg) NORETURN_ATTR;
-void main(uint32_t arg)
+void main(uint32_t arg, uint32_t addr) NORETURN_ATTR;
+void main(uint32_t arg, uint32_t addr)
 {
     unsigned char* loadbuffer;
     int buffer_size;
@@ -124,7 +124,7 @@ void main(uint32_t arg)
     button_init();
 
     //button_debug_screen();
-    printf("arg=%x", arg);
+    printf("arg=%x addr=%x", arg, addr);
 
 #ifdef SANSA_FUZEPLUS
     extern void imx233_mmc_disable_window(void);

firmware/target/arm/imx233/app.lds

@@ -34,6 +34,11 @@ SECTIONS
 {
     loadaddress = UNCACHED_DRAM_ADDR;
     _loadaddress = UNCACHED_DRAM_ADDR;
+
+    .dramcopystart (NOLOAD) :
+    {
+        _dramcopystart = .;
+    } > DRAM
         
     .text :
     {
@@ -76,6 +81,11 @@ SECTIONS
 
     _initcopy = LOADADDR(.init);
 
+    .dramcopyend (NOLOAD) :
+    {
+        _dramcopyend = .;
+    } > DRAM
+
     .stack (NOLOAD) :
     {
         *(.stack)

firmware/target/arm/imx233/boot.lds

@@ -26,6 +26,11 @@ SECTIONS
     _loadaddress = UNCACHED_DRAM_ADDR;
     loadaddressend = UNCACHED_DRAM_ADDR + RAM_HOLE;
     _loadaddressend = UNCACHED_DRAM_ADDR + RAM_HOLE;
+
+    .dramcopystart (NOLOAD) :
+    {
+        _dramcopystart = .;
+    } > DRAM
     
     .text :
     {
@@ -48,6 +53,11 @@ SECTIONS
 
     _iramcopy = LOADADDR(.itext);
 
+    .dramcopyend (NOLOAD) :
+    {
+        _dramcopyend = .;
+    } > DRAM
+
     .ibss (NOLOAD) :
     {
         _iedata = .;

firmware/target/arm/imx233/crt0.S

@@ -33,15 +33,22 @@
     ldr     pc, =irq_handler
     ldr     pc, =fiq_handler
 
-/* When starting, we are running at 0x4xxxxxxx (uncached) but the code
- * assumes DRAM is somewhere else (cached) so we first need to
- * setup the MMU and then jump to the right location. */
+/* When starting, we will be running at 0x40000000 most probably
+ * but the code is expected to be loaded at 0x4xxxxxxx (uncached) and to be
+ * running at virtual address 0xyyyyyyyy (cached). So we first
+ * need to move everything to the right locationn then we setup the mmu and
+ * jump to the final virtual address. */
 .text
 .global start
+    /** The code below must be able to run at any address **/
 start:
+    /* Copy running address */
+    sub     r7, pc, #8
     /* Save r0 */
     mov     r6, r0
-    msr     cpsr_c, #0xd3 /* enter supervisor mode, disable IRQ/FIQ */
+
+    /* enter supervisor mode, disable IRQ/FIQ */
+    msr     cpsr_c, #0xd3
     /* Disable MMU, disable caching and buffering;
      * use low exception range address (the core uses high range by default) */
     mrc     p15, 0, r0, c1, c0, 0
@@ -55,10 +62,25 @@ start:
 
     /* Enable MMU */
     bl      memory_init
+
+    /* Copy the DRAM
+     * Assume the dram binary blob is located at the loading address (r5) */
+    mov    r2, r7
+    ldr    r3, =_dramcopystart
+    ldr    r4, =_dramcopyend
+1:
+    cmp     r4, r3
+    ldrhi   r5, [r2], #4
+    strhi   r5, [r3], #4
+    bhi     1b
+
+    mov     r2, #0
+    mcr     p15, 0, r2, c7, c5, 0   @ Invalidate ICache
+    
     /* Jump to real location */
     ldr     pc, =remap
 remap:
-
+    /** The code below is be running at the right virtual address **/
     /* Zero out IBSS */
     ldr     r2, =_iedata
     ldr     r3, =_iend
@@ -132,6 +154,7 @@ remap:
 
     /* Jump to main */
     mov     r0, r6
+    mov     r1, r7
     bl      main
 1:
     b       1b