devs/foxbox
1
0
Fork 0
forked from len0rd/rockbox
Code Pull requests Activity

More work on consistent usage of units in the manual. Use non-breaking spaces if applicable.

Browse source 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25649 a1c6a512-1295-4272-9138-f99709370657
This commit is contained in:
Andree Buschmann 2010-04-14 20:38:21 +00:00
parent 53cf63fbbc
commit 1248e9c6de
11 changed files with 104 additions and 105 deletions
Download patch file Download diff file Expand all files Collapse all files

2
manual/appendix/appendix.tex
View file

@ -73,7 +73,7 @@ The recording hardware (the MAS) does not allow us to do this
The mp3{}-decoding hardware cannot decode OGG. It can be reprogrammed, but
there is too little memory for OGG and we have no documentation on how to
program the MAS' DSP. Doing the conversion with the CPU is impossible, since
a 12 MHz SH1 is far too slow for this daunting task.
a 12~MHz SH1 is far too slow for this daunting task.
\item Archos Multimedia support.\\
The Archos Multimedia is a completely different beast. It is an entirely
different architecture, different CPU and upgrading the software is done

60
manual/appendix/config_file_options.tex
View file

@ -45,7 +45,7 @@
play selected & on, off & N/A\\
party mode & on, off & N/A\\
scan min step & 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30, 45, 60
& seconds\\
& s\\
seek acceleration & very fast, fast, normal, slow, very slow & N/A\\
antiskip & 5s, 15s, 30s, 1min, 2min, 3min, 5min, 10min & N/A\\
volume fade & on, off & N/A\\
@ -76,15 +76,15 @@
contrast & 0 to 63 & N/A\\
backlight timeout
& off, on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30,
45, 60, 90, 120 & seconds\\
45, 60, 90, 120 & s\\
backlight timeout plugged
& off, on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30,
45, 60, 90, 120 & seconds\\
45, 60, 90, 120 & s\\
backlight filters first keypress & on, off & N/A\\
backlight on button hold & normal, off, on & N/A\\
caption backlight & on, off & N/A\\
brightness & \fixme{devise a way to get ranges from config-*.h} & N/A\\
disk spindown & 3 to 254 & seconds\\
disk spindown & 3 to 254 & s\\
battery capacity & \fixme{devise a way to get ranges from config-*.h} & mAh\\
\opt{battery_types}{
battery type & alkaline, nimh & N/A\\
@ -101,7 +101,7 @@
& multimedia, presentation, browser\opt{usb_hid_mouse}{, mouse}& N/A\\
}
idle poweroff & off, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, 45, 60
& minutes\\
& min\\
max files in playlist & 1000 - 32000 & N/A\\
max files in dir & 50 - 10000 & N/A\\
lang & /path/filename.lng & N/A\\
@ -113,7 +113,7 @@
use most-recent-bookmarks
& off, on & N/A\\
pause on headphone unplug & off, pause, pause and resume & N/A\\
rewind duration on pause & 0 to 15 & seconds\\
rewind duration on pause & 0 to 15 & s\\
disable autoresume if phones not present & off, on & N/A\\
Last.fm Logging & off, on & N/A\\
talk dir & off, number, spell& N/A\\
@ -141,14 +141,14 @@
90s, 2min, 3min, 5min, 10min, 15min & N/A\\
prevent track skip
& on, off & N/A\\
start in screen & previous, root, files, db, wps, menu,
start in screen & previous, root, files, dB, wps, menu,
\opt{recording}{recording, }
\opt{radio}{radio, }
bookmarks & N/A\\
playlist catalog directory & /path/to/dir & N/A\\
\nopt{wheel_acceleration}{
list\_accel\_start\_delay & 0 to 10 & ms\\
list\_accel\_wait & 1 to 10 & seconds\\
list\_accel\_wait & 1 to 10 & s\\
}
%
\opt{swcodec}{
@ -158,36 +158,36 @@
replaygain noclip
& on, off & N/A\\
replaygain preamp
& -120 to 120 & 0.1 dB\\
& -120 to 120 & 0.1~dB\\
%
\opt{crossfade}{
crossfade & off, auto track change, man track skip, shuffle,
shuffle or man track skip, always
& N/A\\
crossfade fade in delay
& 0 to 7 & seconds\\
& 0 to 7 & s\\
crossfade fade out delay
& 0 to 7 & seconds\\
& 0 to 7 & s\\
crossfade fade in duration
& 0 to 15 & seconds\\
& 0 to 15 & s\\
crossfade fade out duration
& 0 to 15 & seconds\\
& 0 to 15 & s\\
crossfade fade out mode
& crossfade, mix & N/A\\
}
%
crossfeed & on, off & N/A\\
crossfeed direct gain
& 0 to 60 & 0.1 dB\\
& 0 to 60 & 0.1~dB\\
crossfeed cross gain
& 30 to 120 & 0.1 dB\\
& 30 to 120 & 0.1~dB\\
crossfeed hf attenuation
& 60 to 240 & 0.1 dB\\
& 60 to 240 & 0.1~dB\\
crossfeed hf cutoff
& 500 to 2000 & Hz\\
%
eq enabled & on, off & N/A\\
eq precut & 0 to 240 & 0.1 dB\\
eq precut & 0 to 240 & 0.1~dB\\
eq band 0 cutoff & 0 to 32768 & Hz\\
eq band 1 cutoff & 0 to 32768 & Hz\\
eq band 2 cutoff & 0 to 32768 & Hz\\
@ -198,23 +198,23 @@
eq band 2 q & 0 to 64 & N/A\\
eq band 3 q & 0 to 64 & N/A\\
eq band 4 q & 0 to 64 & N/A\\
eq band 0 gain & -240 to 240 & 0.1 dB\\
eq band 1 gain & -240 to 240 & 0.1 dB\\
eq band 2 gain & -240 to 240 & 0.1 dB\\
eq band 3 gain & -240 to 240 & 0.1 dB\\
eq band 4 gain & -240 to 240 & 0.1 dB\\
eq band 0 gain & -240 to 240 & 0.1~dB\\
eq band 1 gain & -240 to 240 & 0.1~dB\\
eq band 2 gain & -240 to 240 & 0.1~dB\\
eq band 3 gain & -240 to 240 & 0.1~dB\\
eq band 4 gain & -240 to 240 & 0.1~dB\\
%
dithering enabled & on, off & N/A\\
%
timestretch enabled & on, off & N/A\\
%
compressor threshold & 0 to -24 & -3dB\\
compressor threshold & 0 to -24 & -3~dB\\
compressor makeup gain & off, auto & N/A\\
compressor ratio & 2:1, 4:1, 6:1, 10:1, limit
& N/A\\
compressor knee & hard knee, soft knee
& N/A\\
compressor release time & 100 to 1000 & 100 ms\\
compressor release time & 100 to 1000 & 100~ms\\
%
beep & off, weak, moderate, strong & N/A\\
keyclick & off, weak, moderate, strong & N/A\\
@ -226,8 +226,8 @@
\opt{masf}{
loudness & 0 to 17 & N/A\\
superbass & on, off & N/A\\
auto volume & off, 20 ms, 2 s, 4 s, 8 s
& seconds\\
auto volume & off, 20ms, 2s, 4s, 8s
& N/A\\
mdb enable & on,off & N/A\\
mdb strength & 0 to 127 & dB\\
mdb harmonics & 0 to 100 & \%\\
@ -301,10 +301,10 @@
& on, off & N/A\\
remote backlight timeout
& off, on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25,
30, 45, 60, 90 & seconds\\
30, 45, 60, 90 & s\\
remote backlight timeout plugged
& off, on, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25,
30, 45, 60, 90 & seconds\\
30, 45, 60, 90 & s\\
remote caption backlight
& on, off & N/A\\
remote scroll speed
@ -343,7 +343,7 @@
& off, 0:05, 0:10, 0:15, 0:30, 1:00, 2:00, 4:00, 6:00,
8:00, 16:00, 24:00 & h:mm\\
pre-recording time
& off, 1 to 30 & seconds\\
& off, 1 to 30 & s\\
rec directory & /path/to/dir & N/A\\
}%
\opt{spdif_power}{
@ -357,7 +357,7 @@
jump scroll
& 0 to 5 & N/A\\
jump scroll delay
& 0 to 250 & 0.01 s\\
& 0 to 250 & 0.01~s\\
}%
\bottomrule

4
manual/appendix/wps_tags.tex
View file

@ -164,7 +164,7 @@ produce the information for the next file to be played.
\opt{swcodec}{
\config{\%xf} & Crossfade setting, in the order: Off, Auto Skip, Man Skip,
Shuffle, Shuffle and Man Skip, Always\\
\config{\%rg} & ReplayGain value in use (x.y dB). If used as a conditional,
\config{\%rg} & ReplayGain value in use (x.y~dB). If used as a conditional,
Replaygain type in use: \config{\%?rg{\textless}Off{\textbar}Track%
{\textbar}Album{\textbar}TrackShuffle{\textbar}AlbumShuffle%
{\textbar}No tag{\textgreater}}\\
@ -255,7 +255,7 @@ when used with conditional viewports.
Example: \config{\%?mv2.5{\textless}Volume changing{\textbar}\%pv{\textgreater}}
The example above will display the text ``Volume changing'' if the volume is
being changed and 2.5 secs after the volume button has been released. After
being changed and 2.5 seconds after the volume button has been released. After
that, it will display the volume value.
\section{Settings}

16
manual/configure_rockbox/display_options.tex
View file

@ -33,14 +33,14 @@
The amount of time that the backlight will take to fade from off to on
after a button is pressed. If set to \setting{Off} the backlight will
turn on immediately, with no fade in. Can also be set to
\setting{500 ms}, \setting{1 s} or \setting{2 s}.
\setting{500ms}, \setting{1s} or \setting{2s}.
\item[Backlight Fade Out.]
Like Backlight fade in, this controls the amount of time that the
backlight will take to fade from on to off after a button is pressed. If
set to \setting{Off} the backlight will turn off immediately, with no
fade out. Other valid values: \setting{500 ms}, \setting{1 s},
\setting{2 s}, \setting{3 s}, \setting{4 s}, \setting{5 s} or
\setting{10 s}.
fade out. Other valid values: \setting{500ms}, \setting{1s},
\setting{2s}, \setting{3s}, \setting{4s}, \setting{5s} or
\setting{10s}.
}
\opt{backlight_fade_bool}{
\item[Backlight Fade In.]
@ -200,10 +200,10 @@
\item[Peak Release.]
This determines how fast the bar shrinks when the music becomes
softer. Lower values make the peak meter look smoother.
Expressed in scale units per 10 ms.
Expressed in scale units per 10~ms.
\item[Peak Hold Time.]
Specifies the time after which the peak indicator will reset.
For example, if you set this value to 5 s, the peak indicator displays
For example, if you set this value to 5~s, the peak indicator displays
the loudest volume value that occurred within the last 5 seconds.
Larger values are useful if you want to find the peak level of a song,
which might be of interest when copying music from the \dap\ via the
@ -229,8 +229,8 @@
\item[Minimum and maximum range.]
These two options define the full value range that the peak meter
displays. Recommended values for the \setting{Logarithmic} (dB) setting
are {}-40 dB for minimum and 0 dB for maximum. Recommended values
for \setting{Linear} display are 0 and 100\%. Note that {}-40 dB is
are {}-40~dB for minimum and 0~dB for maximum. Recommended values
for \setting{Linear} display are 0 and 100\%. Note that {}-40~dB is
approximately 1\% in linear value, but if you change the minimum
setting in linear mode slightly and then change to the dB scale,
there will be a large change. You can use these values for `zooming'

2
manual/configure_rockbox/playback_options.tex
View file

@ -194,7 +194,7 @@ you to configure settings related to audio playback.
much, so here you can compensate for that. Please note that a
(large) positive pre-amp setting can cause clipping, unless
prevent clipping is enabled. The pre-amp can be set to any
decibel (dB) value between -12 dB and +12 dB, in increments of 0.5 dB.
decibel (dB) value between -12~dB and +12~dB, in increments of 0.5~dB.
\end{description}
\section{Track Skip Beep}

42
manual/configure_rockbox/recording_settings.tex
View file

@ -21,10 +21,10 @@
\begin{table}[h!]
\begin{rbtabular}{0.75\textwidth}{lX}%
{\emph{Frequency} & \emph{Bitrate} (Kbit/s) -- quality 0$\rightarrow$7}{}{}
44100 Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
22050 Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
44100 Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
22050 Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\
44100~Hz stereo & 75, 80, 90, 100, 120, 140, 160, 170 \\
22050~Hz stereo & 39, 41, 45, 50, 60, 80, 110, 130 \\
44100~Hz mono & 65, 68, 73, 80, 90, 105, 125, 140 \\
22050~Hz mono & 35, 38, 40, 45, 50, 60, 75, 90 \\
\end{rbtabular}
\end{table}
}
@ -44,30 +44,30 @@
\section{Frequency}
\nopt{sansa}{
Choose the recording frequency (sample rate).
\opt{masf}{48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz}
\opt{h100,h300}{44.1 kHz, 22.05 kHz and 11.025 kHz}
\opt{x5}{88.2 kHz, 44.1 kHz, 22.05 kHz and 11.025 kHz}
\opt{sansaAMS}{96 kHz, 88.2 kHz, 64 kHz, 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, %
22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz and 8 kHz}
\opt{gigabeats}{48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, %
11.025 kHz and 8 kHz}
\opt{masf}{48~kHz, 44.1~kHz, 32~kHz, 24~kHz, 22.05~kHz, 16~kHz}
\opt{h100,h300}{44.1~kHz, 22.05~kHz and 11.025~kHz}
\opt{x5}{88.2~kHz, 44.1~kHz, 22.05~kHz and 11.025~kHz}
\opt{sansaAMS}{96~kHz, 88.2~kHz, 64~kHz, 48~kHz, 44.1~kHz, 32~kHz, 24~kHz, %
22.05~kHz, 16~kHz, 12~kHz, 11.025~kHz and 8~kHz}
\opt{gigabeats}{48~kHz, 44.1~kHz, 32~kHz, 24~kHz, 22.05~kHz, 16~kHz, 12~kHz, %
11.025~kHz and 8~kHz}
are available. Higher sample rates use up more disk space, but give better
sound quality.
\opt{swcodec}{\note{The 11.025 kHz setting is not available when using %
\opt{swcodec}{\note{The 11.025~kHz setting is not available when using %
\setting{MPEG Layer 3} format.}
}%
\opt{masf}{
The frequency setting also determines which version of the MPEG standard
the sound is recorded using:\\
MPEG v1 for 48 kHz, 44.1 kHz and 32 kHz.\\
MPEG v2 for 24 kHz, 22.05 kHz and 16 kHz.\\
MPEG v1 for 48~kHz, 44.1~kHz and 32~kHz.\\
MPEG v2 for 24~kHz, 22.05~kHz and 16~kHz.\\
}
\opt{recorder,recorderv2fm,h100}
{\note{You cannot change the sample rate for digital recordings.}
}
} % nopt sansa
\opt{sansa}{
Recordings can only be made at a 22.05 kHz frequency (sample rate)
Recordings can only be made at a 22.05~kHz frequency (sample rate)
on this \dap.
} % opt sansa
@ -121,7 +121,7 @@
Set the time to record between each split, if time is used as
\setting{Split Measure}.\\
Options (hours:minutes between splits): Off, 00:05, 00:10, 00:15, 00:30,
1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
1:00, 1:14 (74 minute CD), 1:20 (80 minute CD), 2:00, 4:00, 8:00, 10:00,
12:00, 18:00, 24:00.
\item[Split Filesize.]
@ -242,25 +242,25 @@ More information can be found at \wikilink{VolumeTriggeredRecording}.
automatically controlling the gain while recording.
\begin{description}
\item[Safety (clip).]
This preset will lower the gain when the levels get too high (-1 dB)
This preset will lower the gain when the levels get too high (-1~dB)
and will never increase gain.
\item[Live (slow).]
This preset is designed to be used for recording of live shows and has
quite large headroom for loud parts. It heads for a nominal target peak
level of -9 dB and will slowly increase or decrease gain to reach it.
level of -9~dB and will slowly increase or decrease gain to reach it.
\item[DJ-Set (slow).]
This preset heads for a nominal target peak level of -5 dB and will
This preset heads for a nominal target peak level of -5~dB and will
slowly increase or decrease gain to reach it.
\item[Medium.]
This preset heads for a nominal target peak level of -6 dB and will
This preset heads for a nominal target peak level of -6~dB and will
increase or decrease gain to reach it.
\item[Voice (fast).]
This preset is designed to be used for voice recording and heads for a
nominal target peak level of -7 dB and will quickly increase or
nominal target peak level of -7~dB and will quickly increase or
decrease gain to reach it.
\end{description}

70
manual/configure_rockbox/sound_settings.tex
View file

@ -7,40 +7,40 @@ change to customise your listening experience.
\section{\label{ref:volume}Volume}
This setting adjusts the volume of your music. Like most professional
audio gear and many consumer audio products, Rockbox uses a decibel scale
where 0 dB is a reference that indicates the maximum volume that the \dap{}
where 0~dB is a reference that indicates the maximum volume that the \dap{}
can produce without possible distortion (clipping). All values lower than
this reference will be negative and yield a progressively softer volume.
\opt{player,recorder,recorderv2fm,ondio,x5,m5,ipodnano,ipodnano2g,ipodvideo,
ipodcolor,ipod1g2g,h10,h10_5gb,sansa,sansaAMS,gigabeats,gigabeatf}{
Values higher than 0 dB are available and can be used to raise the
Values higher than 0~dB are available and can be used to raise the
volume more than would otherwise be possible. These volume levels will
ordinarily lead to distorted sound, but might work nicely for music that has
an otherwise low volume level.}
The volume can be adjusted from a
\opt{player}{minimum of -78 dB to a maximum of +18 dB.}%
\opt{recorder,recorderv2fm,ondio}{minimum of -100 dB to a maximum of +12 dB.}%
\opt{h100,h300}{minimum of -84 dB to a maximum of 0 dB.}%
\opt{x5,m5,ipod3g,ipod4g,gigabeatf,mrobe100}{minimum of -73 dB to a maximum of +6 dB.}%
\opt{ipodnano}{minimum of -72 dB to a maximum of +6 dB.}%
\opt{ipodvideo}{minimum of -89 dB to a maximum of +6 dB.}%
\opt{player}{minimum of -78~dB to a maximum of +18~dB.}%
\opt{recorder,recorderv2fm,ondio}{minimum of -100~dB to a maximum of +12~dB.}%
\opt{h100,h300}{minimum of -84~dB to a maximum of 0~dB.}%
\opt{x5,m5,ipod3g,ipod4g,gigabeatf,mrobe100}{minimum of -73~dB to a maximum of +6~dB.}%
\opt{ipodnano}{minimum of -72~dB to a maximum of +6~dB.}%
\opt{ipodvideo}{minimum of -89~dB to a maximum of +6~dB.}%
\opt{ipodnano2g,ipodcolor,ipod1g2g,h10,h10_5gb,sansa,sansaAMS}{minimum of
-74 dB to a maximum of +6 dB.}%
\opt{gigabeats}{minimum of -90 dB to a maximum of +6 dB.}%
\opt{gigabeatf}{minimum of -74 dB to a maximum of +6 dB.}%
\opt{ipodvideo}{\\Remark: Lowering the volume below -57 dB will also affect the line-out
-74~dB to a maximum of +6~dB.}%
\opt{gigabeats}{minimum of -90~dB to a maximum of +6~dB.}%
\opt{gigabeatf}{minimum of -74~dB to a maximum of +6~dB.}%
\opt{ipodvideo}{\\Remark: Lowering the volume below -57~dB will also affect the line-out
and the recording gain.}
\section{Bass}
This setting emphasises
\nopt{h100,h300}{or suppresses}
the lower (bass) frequencies in the sound. A value of 0 dB means that bass
the lower (bass) frequencies in the sound. A value of 0~dB means that bass
sounds are unaltered (flat response).
\opt{masd}{The minimum setting is -15 dB and the maximum is 15 dB.}%
\opt{masf}{The minimum setting is -12 dB and the maximum is 12 dB.}%
\opt{h100,h300}{The minimum setting is 0 dB and the maximum is 24 dB.}%
\opt{ipodnano,ipodnano2g,ipodcolor}{The minimum setting is -6 dB and the maximum is 9 dB.}%
\opt{ipodvideo}{The minimum setting is -12 dB and the maximum is 12 dB.}%
\opt{x5,sansa,sansaAMS,h10,h10_5gb}{The minimum setting is -24 dB and the maximum is 24 dB.}
\opt{masd}{The minimum setting is -15~dB and the maximum is 15~dB.}%
\opt{masf}{The minimum setting is -12~dB and the maximum is 12~dB.}%
\opt{h100,h300}{The minimum setting is 0~dB and the maximum is 24~dB.}%
\opt{ipodnano,ipodnano2g,ipodcolor}{The minimum setting is -6~dB and the maximum is 9~dB.}%
\opt{ipodvideo}{The minimum setting is -12~dB and the maximum is 12~dB.}%
\opt{x5,sansa,sansaAMS,h10,h10_5gb}{The minimum setting is -24~dB and the maximum is 24~dB.}
\opt{ipodvideo}{
\section{Bass Cutoff}
@ -53,14 +53,14 @@ change to customise your listening experience.
\section{Treble}
This setting emphasises
\nopt{h100,h300}{or suppresses}
the higher (treble) frequencies in the sound. A value of 0 dB means that
the higher (treble) frequencies in the sound. A value of 0~dB means that
treble sounds are unaltered (flat response).
\opt{masd}{The minimum setting is -15 dB and the maximum is 15 dB.}%
\opt{masf}{The minimum setting is -12 dB and the maximum is 12 dB.}%
\opt{h100,h300}{The minimum setting is 0 dB and the maximum is 6 dB.}%
\opt{ipodnano,ipodnano2g,ipodcolor}{The minimum setting is -6 dB and the maximum is 9 dB.}%
\opt{ipodvideo}{The minimum setting is -12 dB and the maximum is 12 dB.}%
\opt{x5,sansa,sansaAMS,h10,h10_5gb}{The minimum setting is -24 dB and the maximum is 24 dB.}
\opt{masd}{The minimum setting is -15~dB and the maximum is 15~dB.}%
\opt{masf}{The minimum setting is -12~dB and the maximum is 12~dB.}%
\opt{h100,h300}{The minimum setting is 0~dB and the maximum is 6~dB.}%
\opt{ipodnano,ipodnano2g,ipodcolor}{The minimum setting is -6~dB and the maximum is 9~dB.}%
\opt{ipodvideo}{The minimum setting is -12~dB and the maximum is 12~dB.}%
\opt{x5,sansa,sansaAMS,h10,h10_5gb}{The minimum setting is -24~dB and the maximum is 24~dB.}
\opt{ipodvideo}{
\section{Treble Cutoff}
@ -138,7 +138,7 @@ change to customise your listening experience.
Auto volume is a feature that automatically lowers the volume on loud parts,
and then slowly restores the volume to the previous level over a time
interval. This setting allows this time interval to be configured. Short
values like 20 ms are useful for ensuring a constant volume for in-car use and
values like 20~ms are useful for ensuring a constant volume for in-car use and
other applications where background noise makes a constant loudness desirable.
A longer timeout means that the change in volume back to the previous level
will be smoother, so there will be fewer sharp changes in volume level.
@ -149,7 +149,7 @@ change to customise your listening experience.
This setting changes the threshold at which bass frequencies are affected by
the \setting{Loudness} setting, making the sound of drums and bass guitar
louder in comparison to the rest of the sound. This setting only has an
effect if \setting{Loudness} is set to a value larger than 0 dB.
effect if \setting{Loudness} is set to a value larger than 0~dB.
}
\opt{masf}{
@ -199,10 +199,10 @@ change to customise your listening experience.
%
\begin{table}[h!]
\begin{rbtabular}{0.5\textwidth}{Xc}{Setting & Value}{}{}
MDB Strength & 50 dB \\
MDB Strength & 50~dB \\
MDB Harmonics & 48\% \\
MDB Centre Frequency & 60 Hz \\
MDB Shape & 90 Hz \\
MDB Centre Frequency & 60~Hz \\
MDB Shape & 90~Hz \\
\end{rbtabular}
\end{table}
@ -280,8 +280,8 @@ change to customise your listening experience.
frequency limit, much like what a ``bass'' control found on ordinary
stereo systems does.
Adjust the ``cutoff'' frequency parameter to decide where the shelving
starts to take effect. For example, a cutoff frequency of 50 Hz will
adjust only very low frequencies. A cutoff frequency of 200 Hz, on the
starts to take effect. For example, a cutoff frequency of 50~Hz will
adjust only very low frequencies. A cutoff frequency of 200~Hz, on the
other hand, will adjust a much wider range of bass frequencies.
The ``gain'' parameter controls how much the loudness of the band is
adjusted. Positive numbers make the EQ band louder, while negative
@ -432,7 +432,7 @@ time-varying noise heard when not performing dithering.
After dithering, noise shaping is performed. This basically just pushes the
dithering noise to the parts of the frequency spectrum humans cannot hear so
easily. In Rockbox' case, some of the noise is pushed up to above 10 kHz.
easily. In Rockbox' case, some of the noise is pushed up to above 10~kHz.
This setting will be put to its best use when listening to dynamic music with
frequently occuring quiet parts, classical music being a typical example. It is
@ -496,5 +496,5 @@ compressed. Once the compressor determines that compression is necessary,
the input signal is reduced appropriately, but the gain isn't allowed to
immediately return to normal levels. This is necessary to reduce artifacts
such as "pumping." Instead, the gain is allowed to return to normal at the
chosen rate. Release Time is the time for the gain to recover by 10 dB.
chosen rate. Release Time is the time for the gain to recover by 10~dB.
}

5
manual/configure_rockbox/system_options.tex
View file

@ -95,9 +95,8 @@ Rockbox can be configured to turn off power after the unit has been idle for a
defined number of minutes. The \dap{} is idle when playback is stopped or
paused. It is not idle while the USB or charger is connected
\opt{recording}{, or while recording}.
Settings are either \setting{Off} or \setting{1} to \setting{10}
minutes in 1 minute steps. Then \setting{15,30,45} and \setting{60} minutes are
available.
Settings are either \setting{Off} or 1 to 10 minutes in 1 minute steps. Then
15, 30, 45 or 60 minutes are available.
\subsection{Limits}

2
manual/plugins/mpegplayer.tex
View file

@ -81,7 +81,7 @@ Display Options Menu
video is full-screen this means it will get overwritten by the video and
appear to flash once per second) the average number of frames decoded per
second, the total number of frames skipped (see the Skip Frames option),
the current time (in 100 Hz ticks) and the time the current frame is due to
the current time (in 100~Hz ticks) and the time the current frame is due to
be displayed.
\item[Limit FPS] (default: on) With this option disabled, mpegplayer will
display the video as fast as it can. Useful for benchmarking.

2
manual/plugins/split_editor.tex
View file

@ -179,7 +179,7 @@ The values in the waveform are scaled according to the settings of the
peak meter. These can be altered in the peak meter settings,
see \reference{ref:Peakmetersetting}. If extreme minimum or
maximum values are set the waveform might be cut off. A minimum
setting of {}-60 dB and a maximum setting of 0 dB are recommended.
setting of {}-60~dB and a maximum setting of 0~dB are recommended.
These settings should be capable of producing useful waveforms for very
soft sounds in logarithmic mode (dB). When the editor is used on loud
sounds (such as commercial rock or pop music) switching to the linear

4
manual/rockbox_interface/wps.tex
View file

@ -203,8 +203,8 @@ your WPS (While Playing Screen).
Between the indicators of the right and left channel there are little dots.
These dots represent important volume values. In linear mode each dot is a
10\% mark. In dBFS mode the dots represent the following values (from right
to left): 0 dB, {}-3 dB, {}-6 dB, {}-9 dB, {}-12 dB, {}-18 dB, {}-24 dB, {}-30 dB,
{}-40 dB, {}-50 dB, {}-60 dB.
to left): 0~dB, {}-3~dB, {}-6~dB, {}-9~dB, {}-12~dB, {}-18~dB, {}-24~dB, {}-30~dB,
{}-40~dB, {}-50~dB, {}-60~dB.
\end{description}
}
\subsection{\label{sec:contextmenu}The WPS Context Menu}