FS#8023: Use of AS3514 #defines instead of magic values.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15297 a1c6a512-1295-4272-9138-f99709370657

firmware/drivers/rtc/rtc_as3514.c

@@ -16,9 +16,10 @@
  * KIND, either express or implied.
  *
  ****************************************************************************/
+#include <stdbool.h>
 #include "rtc.h"
 #include "i2c-pp.h"
-#include <stdbool.h>
+#include "as3514.h"
 
 #define MINUTE_SECONDS      60
 #define HOUR_SECONDS        3600
@@ -54,7 +55,7 @@ int rtc_read_datetime(unsigned char* buf)
     
     /* RTC_AS3514's slave address is 0x46*/
     for (i=0;i<4;i++){
-        tmp[i] = i2c_readbyte(0x46,0x2a+i);
+        tmp[i] = i2c_readbyte(AS3514_I2C_ADDR, RTC_0 + i);
     }
     seconds = tmp[0] + (tmp[1]<<8) + (tmp[2]<<16) + (tmp[3]<<24);
     
@@ -159,7 +160,7 @@ int rtc_write_datetime(unsigned char* buf)
 
     /* Send data to RTC */
     for (i=0;i<4;i++){
-        pp_i2c_send(0x46, 0x2a+i,((seconds>>(8*i)) & 0xff));
+        pp_i2c_send(AS3514_I2C_ADDR, RTC_0 + i, ((seconds >> (8 * i)) & 0xff));
     }
     return 1;
 }

firmware/export/as3514.h

@@ -59,10 +59,18 @@ extern void audiohw_set_monitor(int enable);
 #define AUDIOSET3  0x16
 #define PLLMODE    0x1d
 
+#define SYSTEM     0x20
+#define DCDC15     0x23
+#define SUPERVISOR 0x24
+
 #define IRQ_ENRD0  0x25
 #define IRQ_ENRD1  0x26
 #define IRQ_ENRD2  0x27
 
+#define RTC_0      0x2a
+#define RTC_1      0x2b
+#define RTC_2      0x2c
+#define RTC_3      0x2d
 #define ADC_0      0x2e
 #define ADC_1      0x2f
 

firmware/target/arm/i2c-pp.c

@@ -30,6 +30,7 @@
 #include "logf.h"
 #include "system.h"
 #include "i2c-pp.h"
+#include "as3514.h"
 
 /* Local functions definitions */
 
@@ -217,7 +218,7 @@ void i2c_init(void)
     outl(0, 0x600060a4);
     outl(0x1e, 0x600060a4);
 
-    pp_i2c_send(0x46, 0x24, 5);
+    pp_i2c_send(AS3514_I2C_ADDR, SUPERVISOR, 5);
 #endif
 #endif
 

firmware/target/arm/sandisk/backlight-c200_e200.c

@@ -21,6 +21,7 @@
 #include "lcd.h"
 #include "backlight.h"
 #include "i2c-pp.h"
+#include "as3514.h"
 
 static unsigned short backlight_brightness = DEFAULT_BRIGHTNESS_SETTING;
 
@@ -39,12 +40,12 @@ void __backlight_on(void)
 #ifdef HAVE_LCD_ENABLE
     lcd_enable(true); /* power on lcd */
 #endif
-    pp_i2c_send( 0x46, 0x23, backlight_brightness);
+    pp_i2c_send(AS3514_I2C_ADDR, DCDC15, backlight_brightness);
 }
 
 void __backlight_off(void)
 {
-    pp_i2c_send( 0x46, 0x23, 0x0);
+    pp_i2c_send(AS3514_I2C_ADDR, DCDC15, 0x0);
 #ifdef HAVE_LCD_ENABLE
     lcd_enable(false); /* power off lcd */
 #endif

firmware/target/arm/sandisk/power-c200_e200.c

@@ -22,6 +22,7 @@
 #include "cpu.h"
 #include "i2c-pp.h"
 #include "tuner.h"
+#include "as3514.h"
 
 void power_init(void)
 {
@@ -39,9 +40,9 @@ void power_off(void)
     COP_INT_CLR = -1;
 
     /* Send shutdown command to PMU */
-    byte = i2c_readbyte(0x46, 0x20);
+    byte = i2c_readbyte(AS3514_I2C_ADDR, SYSTEM);
     byte &= ~0x1;   
-    pp_i2c_send(0x46, 0x20, byte);
+    pp_i2c_send(AS3514_I2C_ADDR, SYSTEM, byte);
 
     /* Halt everything and wait for device to power off */
     while (1)

firmware/target/arm/system-pp502x.c

@@ -20,6 +20,7 @@
 #include "thread.h"
 #include "i2s.h"
 #include "i2c-pp.h"
+#include "as3514.h"
 
 #ifndef BOOTLOADER
 extern void TIMER1(void);
@@ -310,7 +311,7 @@ void system_reboot(void)
 #ifdef SANSA_C200
     CACHE_CTL &= ~CACHE_CTL_VECT_REMAP;
 
-    pp_i2c_send( 0x46, 0x23, 0x0); /* backlight off */
+    pp_i2c_send(AS3514_I2C_ADDR, DCDC15, 0x0); /* backlight off */
 
     /* Magic used by the c200 OF: 0x23066000
        Magic used by the c200 BL: 0x23066b7b